Skolelinux-netboot - Sideversjonshistorikk

Admin: Markerte denne versjonen for oversettelse

2025-05-24T18:54:48Z

Markerte denne versjonen for oversettelse

← Eldre sideversjon		Sideversjonen fra 24. mai 2025 kl. 20:54
Linje 124:		Linje 124:
	</translate>		</translate>
	<translate>		<translate>
	== Troubleshooting ==		== Troubleshooting == <!--T:27-->

			<!--T:28-->
	=== No kernel modules were found ===		=== No kernel modules were found ===
	When installing a laptop you recive this warning:		When installing a laptop you recive this warning:

			<!--T:29-->
	No kernel modules were found. This probably is due to a mismatch between the kernel used by this version of the installer and the kernel version available in the archive.		No kernel modules were found. This probably is due to a mismatch between the kernel used by this version of the installer and the kernel version available in the archive.

			<!--T:30-->
	You should make sure that your installation image is up-to-date, or if that's the case deb.debian.org. try a different mirror, preferably		You should make sure that your installation image is up-to-date, or if that's the case deb.debian.org. try a different mirror, preferably

			<!--T:31-->
	The installation will probably fail to work if you continue without kernel modules.		The installation will probably fail to work if you continue without kernel modules.

			<!--T:32-->
	Continue the install without loading kernel modules?		Continue the install without loading kernel modules?

			<!--T:33-->
	'''Solution:'''		'''Solution:'''

			<!--T:34-->
	login to super user shell		login to super user shell

			<!--T:35-->
	<code>su -</code>		<code>su -</code>

			<!--T:36-->
	Then run this two commands:		Then run this two commands:

			<!--T:37-->
	<code>di-netboot-assistant --arch=amd64 install stable</code>		<code>di-netboot-assistant --arch=amd64 install stable</code>

			<!--T:38-->
	<code>di-netboot-assistant --ignore-sig fw-toggle stable</code>		<code>di-netboot-assistant --ignore-sig fw-toggle stable</code>

			<!--T:39-->
	Then restart the laptop you were installing and start the install prorcess again		Then restart the laptop you were installing and start the install prorcess again
	</translate>		</translate>

Admin på 24. mai 2025 kl. 18:54

2025-05-24T18:54:35Z

← Eldre sideversjon		Sideversjonen fra 24. mai 2025 kl. 20:54
Linje 123:		Linje 123:
	e) Connect a network cable from the network card on the laptop to Internet in network card on the preseed machine.		e) Connect a network cable from the network card on the laptop to Internet in network card on the preseed machine.
	</translate>		</translate>
			<translate>
	== Troubleshooting ==		== Troubleshooting ==

Linje 150:		Linje 150:

	Then restart the laptop you were installing and start the install prorcess again		Then restart the laptop you were installing and start the install prorcess again
			</translate>

Admin: Markerte denne versjonen for oversettelse

2025-05-24T18:52:35Z

Markerte denne versjonen for oversettelse

← Eldre sideversjon		Sideversjonen fra 24. mai 2025 kl. 20:52
Linje 106:		Linje 106:
	a) Go to systemsettings/systeminnstillinger -> Strømstyring/Powermanagement -> ta av haken i Lås økt / Lock session and click on Bruk/Use		a) Go to systemsettings/systeminnstillinger -> Strømstyring/Powermanagement -> ta av haken i Lås økt / Lock session and click on Bruk/Use

	== Share wireless internett to the netboot machine ==<!--T:21-->		== Share wireless internett to the netboot machine == <!--T:21-->

	<!--T:22-->		<!--T:22-->

Admin: added solution to the no kernel modules were found warning

2025-05-24T18:51:56Z

added solution to the no kernel modules were found warning

@@ Linje 106: / Linje 106: @@
 a) Go to systemsettings/systeminnstillinger -> Strømstyring/Powermanagement -> ta av haken i Lås økt / Lock session and click on Bruk/Use
-=== Share wireless internett to the netboot machine === <!--T:21-->
+== Share wireless internett to the netboot machine ==<!--T:21-->
 <!--T:22-->
@@ Linje 123: / Linje 123: @@
 e) Connect a network cable from the network card on the laptop to Internet in network card on the preseed machine.
 </translate>

Malinux: /* skolelinux-netboot */

2025-05-08T09:39:47Z

skolelinux-netboot

← Eldre sideversjon		Sideversjonen fra 8. mai 2025 kl. 11:39
Linje 14:		Linje 14:

	<!--T:5-->		<!--T:5-->
	You need a normal computer, with two network ports. ~~Deoending~~ on your needs, you may be ok with wifi to the internet, and an ethernet port (native or usb dongle) to the local pxe/netboot network. For bigger and more stable setups, a computer with two physical ethernet ports is recommended.		You need a normal computer, with two network ports. Depending on your needs, you may be ok with wifi to the internet, and an ethernet port (native or usb dongle) to the local pxe/netboot network. For bigger and more stable setups, a computer with two physical ethernet ports is recommended and an unmaged switch.

	<!--T:6-->		<!--T:6-->

Malinux: Markerte denne versjonen for oversettelse

2025-03-17T23:37:57Z

Markerte denne versjonen for oversettelse

← Eldre sideversjon		Sideversjonen fra 18. mar. 2025 kl. 01:37
Linje 1:		Linje 1:
	<languages/>		<languages/>
	<translate>		<translate>
			<!--T:1-->
	= skolelinux-netboot =		= skolelinux-netboot =
	source: https://git.nuug.no/nuug-public/skolelinux-netboot		source: https://git.nuug.no/nuug-public/skolelinux-netboot

			<!--T:2-->
	This repository contains ansible tasks to set up a netboot server for the sole purpose of assisting in setting up laptops in the NUUG/Skolelinux dugnad. It is very specific to our current usecase, and may or may not be useful for anyone else.		This repository contains ansible tasks to set up a netboot server for the sole purpose of assisting in setting up laptops in the NUUG/Skolelinux dugnad. It is very specific to our current usecase, and may or may not be useful for anyone else.

			<!--T:3-->
	Only Debian 12 with has been tested.		Only Debian 12 with has been tested.

	== Getting started ==		== Getting started == <!--T:4-->

			<!--T:5-->
	You need a normal computer, with two network ports. Deoending on your needs, you may be ok with wifi to the internet, and an ethernet port (native or usb dongle) to the local pxe/netboot network. For bigger and more stable setups, a computer with two physical ethernet ports is recommended.		You need a normal computer, with two network ports. Deoending on your needs, you may be ok with wifi to the internet, and an ethernet port (native or usb dongle) to the local pxe/netboot network. For bigger and more stable setups, a computer with two physical ethernet ports is recommended.

			<!--T:6-->
	After your standard Debian 12 installation, configure your second network port for the local network you will be netbooting on. Make sure you have a big enough subnet to contain the number of clients you want to netboot at any given time.		After your standard Debian 12 installation, configure your second network port for the local network you will be netbooting on. Make sure you have a big enough subnet to contain the number of clients you want to netboot at any given time.

			<!--T:7-->
	The network configured on this interface, will be configured later for the DHCP server as well.		The network configured on this interface, will be configured later for the DHCP server as well.

			<!--T:8-->
	Make sure you upgrade all packages available, and after you've done the setup, reboot your netboot host to ensure it's running the latest kernel and your network ports have their IP addresses as needed.		Make sure you upgrade all packages available, and after you've done the setup, reboot your netboot host to ensure it's running the latest kernel and your network ports have their IP addresses as needed.

			<!--T:9-->
	You need to install ansible and git on your netboot host first:		You need to install ansible and git on your netboot host first:

			<!--T:10-->
	a) If you installed Debian 12 netinstall, run the following to be root:		a) If you installed Debian 12 netinstall, run the following to be root:
	su -		su -
	Enter the password for your user account and you are root.		Enter the password for your user account and you are root.

			<!--T:11-->
	b) Else if you installed Debian 12 kde live run this command to be root:		b) Else if you installed Debian 12 kde live run this command to be root:
	sudo -i		sudo -i
Linje 30:		Linje 40:
	Then run ansible-pull to run the tasks from this repository:		Then run ansible-pull to run the tasks from this repository:

			<!--T:12-->
	Then you can clone the public git repository used to set up the remainder of the netboot infrastructure:		Then you can clone the public git repository used to set up the remainder of the netboot infrastructure:
	<code>git clone <nowiki>https://git.nuug.no/nuug-public/skolelinux-netboot.git</nowiki></code>		<code>git clone <nowiki>https://git.nuug.no/nuug-public/skolelinux-netboot.git</nowiki></code>
	This will create the directory <code>skolelinux-netboot/</code> that contains the ansible playbook and other data needed to configure the netboot host.		This will create the directory <code>skolelinux-netboot/</code> that contains the ansible playbook and other data needed to configure the netboot host.

	cd skolelinux-netboot		<!--T:13-->
			cd skolelinux-netboot

	=== Configure local settings ===		=== Configure local settings === <!--T:14-->

			<!--T:15-->
	Before running the playbook, you need to create a file <code>local-vars.yml</code> (this file is ignored by git) containing values the ansible playbook will use during the setup. Use your favourite editor to create the file, and fill it with the following data:		Before running the playbook, you need to create a file <code>local-vars.yml</code> (this file is ignored by git) containing values the ansible playbook will use during the setup. Use your favourite editor to create the file, and fill it with the following data:
	internet_interface: "eno1" # Interface name that has internet access		internet_interface: "eno1" # Interface name that has internet access
Linje 77:		Linje 90:
	You should now be able to use this host in the local network where you are performing the Skolelinux installations. This host should be the only DHCP server in the network, and the gateway IP must match what is being pushed by this host over DHCP.		You should now be able to use this host in the local network where you are performing the Skolelinux installations. This host should be the only DHCP server in the network, and the gateway IP must match what is being pushed by this host over DHCP.

			<!--T:16-->
	If there are any changes in your <code>local-vars.yml</code> file, you should be able to simply re-run the playbook, and the system will be reconfigured accordingly.		If there are any changes in your <code>local-vars.yml</code> file, you should be able to simply re-run the playbook, and the system will be reconfigured accordingly.

			<!--T:17-->
	If there are any new development for this setup made available in the git repository, you can update your files, by running a git command while being in the <code>skolelinux-netboot/</code> directory:		If there are any new development for this setup made available in the git repository, you can update your files, by running a git command while being in the <code>skolelinux-netboot/</code> directory:
	<code>git pull</code>		<code>git pull</code>
	To apply the latest changes, re-run the ansible playbook again.		To apply the latest changes, re-run the ansible playbook again.

	=== Disable Suspend/Hvilemodus på preseed-maskinen ===		=== Disable Suspend/Hvilemodus på preseed-maskinen === <!--T:18-->

			<!--T:19-->
	When this is not disabled the computers getting tanked from the preseed machine wil stop installing as we have experienced xD		When this is not disabled the computers getting tanked from the preseed machine wil stop installing as we have experienced xD

			<!--T:20-->
	a) Go to systemsettings/systeminnstillinger -> Strømstyring/Powermanagement -> ta av haken i Lås økt / Lock session and click on Bruk/Use		a) Go to systemsettings/systeminnstillinger -> Strømstyring/Powermanagement -> ta av haken i Lås økt / Lock session and click on Bruk/Use

	=== Share wireless internett to the netboot machine ===		=== Share wireless internett to the netboot machine === <!--T:21-->

			<!--T:22-->
	a) Either start a preinstalled Debian 12 kde laptop with both wireless and ethernet network (cable), or boot a Debian live KDE from a USB-stick		a) Either start a preinstalled Debian 12 kde laptop with both wireless and ethernet network (cable), or boot a Debian live KDE from a USB-stick

			<!--T:23-->
	b) When the system is started to Desktop -> left click the network icon in the bottom right corner and connect to a wireless network. Example Rebel-Network		b) When the system is started to Desktop -> left click the network icon in the bottom right corner and connect to a wireless network. Example Rebel-Network

			<!--T:24-->
	c) Right click the network icon in the right corner of the screen again and do: > Configure Network Connections/Sett opp nettverkskoblinger -> Wired Connection 1 -> Kablet Forbindelse 1 -> IPv4 (tab/fane -> Method/Metode -> Shared to other computers / Delt til andre datamaskiner -> Use/Bruk		c) Right click the network icon in the right corner of the screen again and do: > Configure Network Connections/Sett opp nettverkskoblinger -> Wired Connection 1 -> Kablet Forbindelse 1 -> IPv4 (tab/fane -> Method/Metode -> Shared to other computers / Delt til andre datamaskiner -> Use/Bruk

			<!--T:25-->
	d) Go to settings -> powermanagement/strømstyring -> On AC Power/På nettstørm (tab/fane) -> remove check mark for Lock session -> On battery/På batteridrift > remove check mark for Lock session -> On Low Battery/Lavt batterinivå remove check mark for Lock session -> click Use/Bruk		d) Go to settings -> powermanagement/strømstyring -> On AC Power/På nettstørm (tab/fane) -> remove check mark for Lock session -> On battery/På batteridrift > remove check mark for Lock session -> On Low Battery/Lavt batterinivå remove check mark for Lock session -> click Use/Bruk

			<!--T:26-->
	e) Connect a network cable from the network card on the laptop to Internet in network card on the preseed machine.		e) Connect a network cable from the network card on the laptop to Internet in network card on the preseed machine.
	</translate>		</translate>

Malinux: Malinux flyttet siden Skolelinux-netboot-en til Skolelinux-netboot

2025-03-17T23:37:32Z

Malinux flyttet siden Skolelinux-netboot-en til Skolelinux-netboot

← Eldre sideversjon	Sideversjonen fra 18. mar. 2025 kl. 01:37
(Ingen forskjell)

Admin: Prepared the page for translation

2025-03-07T11:07:01Z

Prepared the page for translation

← Eldre sideversjon		Sideversjonen fra 7. mar. 2025 kl. 13:07
Linje 1:		Linje 1:
			<languages/>
			<translate>
	= skolelinux-netboot =		= skolelinux-netboot =
	source: https://git.nuug.no/nuug-public/skolelinux-netboot		source: https://git.nuug.no/nuug-public/skolelinux-netboot
Linje 7:		Linje 9:

	== Getting started ==		== Getting started ==

	You need a normal computer, with two network ports. Deoending on your needs, you may be ok with wifi to the internet, and an ethernet port (native or usb dongle) to the local pxe/netboot network. For bigger and more stable setups, a computer with two physical ethernet ports is recommended.		You need a normal computer, with two network ports. Deoending on your needs, you may be ok with wifi to the internet, and an ethernet port (native or usb dongle) to the local pxe/netboot network. For bigger and more stable setups, a computer with two physical ethernet ports is recommended.

Linje 34:		Linje 37:

	=== Configure local settings ===		=== Configure local settings ===

	Before running the playbook, you need to create a file <code>local-vars.yml</code> (this file is ignored by git) containing values the ansible playbook will use during the setup. Use your favourite editor to create the file, and fill it with the following data:		Before running the playbook, you need to create a file <code>local-vars.yml</code> (this file is ignored by git) containing values the ansible playbook will use during the setup. Use your favourite editor to create the file, and fill it with the following data:
	internet_interface: "eno1" # Interface name that has internet access		internet_interface: "eno1" # Interface name that has internet access
Linje 80:		Linje 84:

	=== Disable Suspend/Hvilemodus på preseed-maskinen ===		=== Disable Suspend/Hvilemodus på preseed-maskinen ===

	When this is not disabled the computers getting tanked from the preseed machine wil stop installing as we have experienced xD		When this is not disabled the computers getting tanked from the preseed machine wil stop installing as we have experienced xD

Linje 85:		Linje 90:

	=== Share wireless internett to the netboot machine ===		=== Share wireless internett to the netboot machine ===

	a) Either start a preinstalled Debian 12 kde laptop with both wireless and ethernet network (cable), or boot a Debian live KDE from a USB-stick		a) Either start a preinstalled Debian 12 kde laptop with both wireless and ethernet network (cable), or boot a Debian live KDE from a USB-stick

Linje 94:		Linje 100:

	e) Connect a network cable from the network card on the laptop to Internet in network card on the preseed machine.		e) Connect a network cable from the network card on the laptop to Internet in network card on the preseed machine.
			</translate>

Admin på 4. jan. 2025 kl. 15:51

2025-01-04T15:51:10Z

← Eldre sideversjon		Sideversjonen fra 4. jan. 2025 kl. 17:51
Linje 79:		Linje 79:
	To apply the latest changes, re-run the ansible playbook again.		To apply the latest changes, re-run the ansible playbook again.

	=== ~~share~~ wireless internett to the netboot machine ===		=== Disable Suspend/Hvilemodus på preseed-maskinen ===
			When this is not disabled the computers getting tanked from the preseed machine wil stop installing as we have experienced xD

			a) Go to systemsettings/systeminnstillinger -> Strømstyring/Powermanagement -> ta av haken i Lås økt / Lock session and click on Bruk/Use

			=== Share wireless internett to the netboot machine ===
	a) Either start a preinstalled Debian 12 kde laptop with both wireless and ethernet network (cable), or boot a Debian live KDE from a USB-stick		a) Either start a preinstalled Debian 12 kde laptop with both wireless and ethernet network (cable), or boot a Debian live KDE from a USB-stick

Linje 86:		Linje 91:
	c) Right click the network icon in the right corner of the screen again and do: > Configure Network Connections/Sett opp nettverkskoblinger -> Wired Connection 1 -> Kablet Forbindelse 1 -> IPv4 (tab/fane -> Method/Metode -> Shared to other computers / Delt til andre datamaskiner -> Use/Bruk		c) Right click the network icon in the right corner of the screen again and do: > Configure Network Connections/Sett opp nettverkskoblinger -> Wired Connection 1 -> Kablet Forbindelse 1 -> IPv4 (tab/fane -> Method/Metode -> Shared to other computers / Delt til andre datamaskiner -> Use/Bruk

	d)		d) Go to settings -> powermanagement/strømstyring -> On AC Power/På nettstørm (tab/fane) -> remove check mark for Lock session -> On battery/På batteridrift > remove check mark for Lock session -> On Low Battery/Lavt batterinivå remove check mark for Lock session -> click Use/Bruk

	e) Go to settings -> powermanagement/strømstyring -> On AC Power/På nettstørm (tab/fane) -> remove check mark for Lock session -> On battery/På batteridrift > remove check mark for Lock session -> On Low Battery/Lavt batterinivå remove check mark for Lock session -> click Use/Bruk

	f) Connect a network cable from the network card on the laptop to Internet in network card on the preseed machine.		e) Connect a network cable from the network card on the laptop to Internet in network card on the preseed machine.

Admin på 31. des. 2024 kl. 17:11

2024-12-31T17:11:57Z

← Eldre sideversjon		Sideversjonen fra 31. des. 2024 kl. 19:11
Linje 68:		Linje 68:
	<code>ansible-playbook netboot-host-setup.yml -D</code>		<code>ansible-playbook netboot-host-setup.yml -D</code>
	It's probably a good idea to reboot your netboot host again after this (assuming all went well), to make sure services start at boot (DHCP server, ProFTPd, Apt-cacher-ng). You can check with e.g.:		It's probably a good idea to reboot your netboot host again after this (assuming all went well), to make sure services start at boot (DHCP server, ProFTPd, Apt-cacher-ng). You can check with e.g.:
	<systemctl status proftpd.service		systemctl status proftpd.service
	systemctl status isc-dhcp-server.service		systemctl status isc-dhcp-server.service
	systemctl status apt-cacher-ng.service~~</code>~~		systemctl status apt-cacher-ng.service
	You should now be able to use this host in the local network where you are performing the Skolelinux installations. This host should be the only DHCP server in the network, and the gateway IP must match what is being pushed by this host over DHCP.		You should now be able to use this host in the local network where you are performing the Skolelinux installations. This host should be the only DHCP server in the network, and the gateway IP must match what is being pushed by this host over DHCP.