Malinux på 17. mar. 2025 kl. 23:52

2025-03-17T23:52:31Z

← Eldre sideversjon		Sideversjonen fra 18. mar. 2025 kl. 01:52
Linje 1:		Linje 1:
	~~Before running the playbook~~, ~~you need to create a file~~ <code>local-vars.yml</code> (~~this file is ignored by~~ git) ~~containing values the ansible playbook will use during the setup~~. ~~Use your favourite editor to create the file~~, ~~and fill it with the following~~ data:		Før du kjører spilleboken, må du lage en fil <code>local-vars.yml</code> (denne filen ignoreres av git) som inneholder verdier den mulige spilleboken vil bruke under oppsettet. Bruk favorittredigeringsprogrammet for å lage filen, og fyll den med følgende data:
	internet_interface: "eno1" # ~~Interface name that has internet access~~		internet_interface: "eno1" # Grensesnittnavn som har internettilgang

	# DHCP server configuration		# DHCP server configuration
Linje 12:		Linje 12:
	dhcpd_option_nextserver: "192.168.100.1" # Netboot PXE server (your netboot host!)		dhcpd_option_nextserver: "192.168.100.1" # Netboot PXE server (your netboot host!)

	# ~~Full name~~, ~~username and cleartext password of your desired non~~-root		# Fullt navn, brukernavn og klartekstpassord for ønsket ikke-root
	# ~~user to be created during preseed~~. ~~This is going to be the user that~~		# bruker som skal opprettes under forhåndsinnstilling. Dette kommer til å være brukeren som
	# ~~is automatically logged in as the kiosk user~~.		# er automatisk logget inn som kioskbruker.
	preseed_user_fullname: ""		preseed_user_fullname: ""
	preseed_username: ""		preseed_username: ""
	preseed_user_password: ""		preseed_user_password: ""

	# ~~Username and password that will be configured in~~ ProFTP ~~and that~~ ShredOS ~~will~~		# Brukernavn og passord som vil bli konfigurert i ProFTP og som ShredOS vil
	# ~~use to upload~~ PDF ~~reports~~ # ~~after shredding of disks~~.		# brukes til å laste opp PDF-rapporter # etter sletting av disker.
	proftpd_shredos_user: "~~someuser~~"		proftpd_shredos_user: "enbruker"
	proftpd_shredos_pass: "~~somepass~~"		proftpd_shredos_pass: "ettpassord"

	# ~~A list of donors of laptops~~. ~~IMPORTANT~~: ~~Use only lowercase and uppalphanumeric~~		# En liste over givere av bærbare datamaskiner. VIKTIG: Bruk kun små og oppalfanumeriske bokstaver
	# (a-z, A-Z, 0-9), ~~no spaces~~! ~~Each donor will get their own~~ ShredOS netboot ~~menu~~		# (a-z, A-Z, 0-9), ingen mellomrom! Hver giver vil få sin egen ShredOS netboot-meny # valg, og deres egen ShredOS-logg-katalog.
	# ~~choice~~, ~~and their own~~ ShredOS ~~logs directory~~.
	donors:		donors:
	- "bigcompany"		- "bigcompany"
	- "district123"		- "district123"
	~~Now you should be able to run the playbook that will perform all the necessary configuration tasks~~. ~~This might take a little while~~.		Nå skal du kunne kjøre spilleboken som vil utføre alle nødvendige konfigurasjonsoppgaver. Dette kan ta litt tid.
	<code>ansible-playbook netboot-host-setup.yml -D</code>		<code>ansible-playbook netboot-host-setup.yml -D</code>
	~~It's probably a good idea to reboot your netboot host again after this~~ (~~assuming all went well~~), ~~to make sure services start~~ at ~~boot~~ (DHCP server, ProFTPd, Apt-cacher-ng). ~~You can check with e~~.g.:		Det er sannsynligvis en god idé å starte nettboot-verten på nytt etter dette (forutsatt at alt gikk bra), for å sikre at tjenestene starter ved oppstart (DHCP-server, ProFTPd, Apt-cacher-ng). Du kan sjekke med f.eks.:
	systemctl status proftpd.service		systemctl status proftpd.service
	systemctl status isc-dhcp-server.service		systemctl status isc-dhcp-server.service
	systemctl status apt-cacher-ng.service		systemctl status apt-cacher-ng.service
	~~You should now be able to use this host in the local network where you are performing the~~ Skolelinux ~~installations~~. ~~This host should be the only~~ DHCP ~~server in the network~~, ~~and the~~ gateway IP ~~must match what is being pushed by this host~~ over DHCP.		Du skal nå kunne bruke denne verten i det lokale nettverket der du utfører Skolelinux-installasjonene. Denne verten skal være den eneste DHCP-serveren i nettverket, og gateway-IP-en må samsvare med det som blir presset av denne verten over DHCP.

FuzzyBot: Importerer en ny versjon fra en ekstern kilde

2025-03-17T23:38:02Z

Importerer en ny versjon fra en ekstern kilde

Ny side

Before running the playbook, you need to create a file <code>local-vars.yml</code> (this file is ignored by git) containing values the ansible playbook will use during the setup. Use your favourite editor to create the file, and fill it with the following data:
internet_interface: "eno1" # Interface name that has internet access

# DHCP server configuration
dhcpd_interface: "enx7cc2c6469631" # Interface name for local netboot network
dhcpd_subnet_network: "192.168.100.0" # Network address for local network
dhcpd_subnet_netmask: "255.255.252.0" # Network netmask for local network
dhcpd_pool_start: "192.168.100.50" # DHCP IP pool start address
dhcpd_pool_end: "192.168.103.250" # DHCP IP pool end address
dhcpd_option_routers: "192.168.100.1" # Gateway for local network (your netboot host!)
dhcpd_option_domainnameservers: "1.1.1.1,1.0.0.1" # DNS servers to push to clients
dhcpd_option_nextserver: "192.168.100.1" # Netboot PXE server (your netboot host!)

# Full name, username and cleartext password of your desired non-root
# user to be created during preseed. This is going to be the user that
# is automatically logged in as the kiosk user.
preseed_user_fullname: ""
preseed_username: ""
preseed_user_password: ""

# Username and password that will be configured in ProFTP and that ShredOS will
# use to upload PDF reports # after shredding of disks.
proftpd_shredos_user: "someuser"
proftpd_shredos_pass: "somepass"

# A list of donors of laptops. IMPORTANT: Use only lowercase and uppalphanumeric
# (a-z, A-Z, 0-9), no spaces! Each donor will get their own ShredOS netboot menu
# choice, and their own ShredOS logs directory.
donors:
- "bigcompany"
- "district123"
Now you should be able to run the playbook that will perform all the necessary configuration tasks. This might take a little while.
<code>ansible-playbook netboot-host-setup.yml -D</code>
It's probably a good idea to reboot your netboot host again after this (assuming all went well), to make sure services start at boot (DHCP server, ProFTPd, Apt-cacher-ng). You can check with e.g.:
systemctl status proftpd.service
systemctl status isc-dhcp-server.service
systemctl status apt-cacher-ng.service
You should now be able to use this host in the local network where you are performing the Skolelinux installations. This host should be the only DHCP server in the network, and the gateway IP must match what is being pushed by this host over DHCP.

Translations:Skolelinux-netboot/15/nb - Sideversjonshistorikk

Malinux på 17. mar. 2025 kl. 23:52

FuzzyBot: Importerer en ny versjon fra en ekstern kilde